1-THERMAL BLOCKS INSERTS
The evolution of modern construction methods has meant EPS Inserts have replaced the traditional cavity wall insulation system due to their superior performance. The inserts are used in outer walls of buildings to provide insulation.
2-EXTERNAL INSULATION FINISHING SYSTEMS
Exterior Insulated Finish System (EIFS) is one of the most tested and well researched claddings in the construction industry. In addition, EIFS is in full compliance with modern business codes which emphasise energy conservation through the use of CI (Continuous Insulation) and a continuous air barrier. EIFS is a general class of non-load bearing cladding system that provides exterior walls with an insulated water resistant finished surface, in an integrated composite material system.
3-ROOF INSULATION
Roofing systems are one of the most important and largest expenditures that building owners can make. With the capability to be used in virtually all commercial roofing systems, the closed cell, lightweight, ATC Polystyrene Insulation Sheets (EPS) is the most popular choice. EPS is most successful when installed correctly and can be used in modified bitumen systems, built up roofing, and single‐ply membrane systems that are ballasted, mechanically fastened or fully adhered. It can be used in conjunction with: steel sheets; aluminum sheets; gypsum boards; lightweight concrete slabs; decorative slabs. Using EPS (Expanded Polystyrene) from ATC Polystyrene is a popular choice for a number of technical and practical reasons
4-PIPE INSULATION
ATC Polystyrene is a cost-effective, durable, and energy efficient solution for pipe insulation, in the range of temperatures from -100F to + 165F. As a manufacturer, we can provide the exact density most suitable for your application. It is available in standard or custom cut fabricated profiles with the custom cut including for elbows, T-Junctions, connecters, flanges etc. EPS pipe insulation is provided in two symmetrical half sections with a butt joint standard or optional tongue and groove/shiplap/zigzag joints. We can use many options for lamination to protect the EPS insulation item like aluminum foil, craft paper, and PVC tape. Proper design will prevent premature failures and result of lost insulation efficiency.
Let our engineers provide expert advice on the most suitable Expanded Polystyrene insulation solution for your project.
